Trapping Balloon Catheter
TrapIt
Balloon designed to trap with high trapping friction
Highly compatible small shaft profile
Unique auto stop for positioning aid
TrapIt
Trapping balloon catheter
Indicated to facilitate interventional device exchange while maintaining wire position in patients undergoing PCI procedures.*
The TrapIt is a dedicated trapping balloon. It is indicated to securely trap a guide wire in the guiding catheter
in order to exchange over-the-wire devices such as microcatheters. TrapIt does not require a guide wire to be advanced within the guide catheter. As an aid in positioning the balloon in a guide catheter a 90 or 100 cm tactile feedback stop is integrated in the shaft at the respective specific length for the used guide catheter.
Technical Data
| Trapping balloon catheter | |
|---|---|
| Nominal Pressure (NP) | 8 atm |
| Rated Burst Pressure (RBP) | 12 atm |
| Shaft diameter | 2F |
| Balloon length | 15 mm |
| Inflated balloon diameter | 2.5 mm |
| Auto stop distance from tip | 100 cm to 110 cm |
| Effective length | 100 cm and 110 cm |
| Ordering Information | Ordering number | IMDS article number | Guiding catheter compatibility (diameter) | Guiding catheter compatibility (length) | ||||||||||
| 451667 | TRP9015 | 6F, 7F, 8F | 90 cm | |||||||||||
| 451668 | TRP10015 | 6F, 7F, 8F | 90 cm**, 100 cm | |||||||||||
Contact
*Indication as per IFU
**For use with a 90 cm guiding catheter, the shaft of the 100 cm compatible TrapIt is provided with a depth marking to indicate that the distal tip
of the catheter is at the level of the distal tip of the guiding catheter.
TrapIt is a trademark of IMDS.
Distributed by BIOTRONIK in selected countries.
Manufacturer:
IMDS Operations B.V.
Ceintuurbaan Noord 150
9301 NZ Roden,
The Netherlands
Tel +31 (0)50 8200230
info@imds.nl
